Software manual Apache 700XR Quattro

Programming through software

Control the XR unit via RS232 or IP (IP as from XR version 2.1.6)

NOTICE: When the software is connected to the XR, the unit will not respond to an incoming call.

At this page enter all regular phone numbers that will activate the XR unit.
Those phone numbers don’t have time or date limitation.
The list can hold 3600 phone numbers.
To load new phone number use the 3 blank boxes USER DETAILS. Also here you can assign the relay that has to be switched and set a SMS notiﬁcation.
After enter a phone number klick on SET. The new user is now on the list.
To load long list of phone numbers and user names use INPORT FROM EXCEL box icon, to make first time excel ﬁle use EXPORT TO EXCEL, this way the basic ﬁle with all column will be shown.
To compare the phone number list that are in the XR unit to the list on the PC, use QUICK COMPARE box icon.
When new phone number enter to the software list on the index will appear the phone number with yellow marker, after loading the number to the XR unit the index marker will change to green.
The GET PHONE NUMBERS FROM UNIT box icon, allow to get phone numbers that are stored on the XR unit. When all numbers are green the process can be paused by clicking the STOP button.
When looking for phone number or user name on the list, use the search boxes icon.
Pay attention on the lower right side of this page there is massage box that dis plays the software to XR unit connection status: DISCONNECTED FROM UNIT or CONNECTED TO UNIT.

At this page enter all special phone numbers that will activate the XR unit.
Those phone numbers will have time or date limitation.
The list can hold 400 phone numbers.
To load new phone number use the 3 blank boxes on the lower left side of the page, then select what kind of limitation this phone number will have, there are 3 options: FROM TIME TO TIME, FROM DATE TO DATE, ENTERY AMOUNT. For the FROM TIME TO TIME ﬁll the week day and the time boxes. For the FROM DATE TO DATE ﬁle the date to date boxes. For the ENTERIES AMOUNT ﬁle the number of entries box. Also here you can assign the relay that has to be switched and set a SMS notiﬁcation.
To load a long list of phone numbers and user names use INPORT FROM EXCEL box icon, to ﬁrst time excel ﬁle use EXPORT TO EXCEL, this way the basic ﬁle with all columns will be shown.
When a new phone number is entered to the list, it will appear with a yellow marker, after loading the number to the XR unit the index marker will change to green.
To load new phone numbers to the XR unit use the SET box icon. The new user is now on the list.

Week clock: here you can set the week clock for the unit. For example you can set a relay standard open from Monday to Friday during ofﬁce hours. Outside these times, you can still dial to switch the relay.
Relay activation time: delay in seconds for switching the relay.
Phone numbers for SMS notify: set which phone numbers should receive notiﬁcations when a relay is switched or acces is denied.
GPRS: see next page.
Open everyone, enables access to everyone who calls the unit, regardless of whether he or she is registered in the unit.
Automatic clock update, on unit power up, unit can get the time from self SMS, ﬁll the SIM number on the unit to this box.
Unit time, set time for special phone numbers and log.
Unit password, change unit password, same password apply to SMS RS232 or IP connection.
Signal level, get unit reception level under 30% will consider low level, try to improve GSM antenna location for better reception.
Version, get unit software version.
Unit name, for multi gate user, each unit has a name.

GPRS: Here you can enter the data for IP connection with the unit. Check with your provider for the following information and enter it here: APN and possible user name and password. Let “Firewall IP” be default 0.0.0.0.
Press ”write data”
Restart the unit by disconnecting the power or by pressing the reset button.
Send – once the unit is restarted – an SMS to the unit with P.1234IP?
You can now connect through IP by entering the just received IP address into the “communication selection” window.